Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Dec 2013
    Location
    Plymouth, IN
    Posts
    173
    Rep Power
    14

    Iradv c5051 jam code 0010

    Has anyone had a problem with the one pass document feeder crumpling a corner on a page which causes constant

    jams? The document feed height seems to be set okay. The hard part is seeing where the corners are stubbing their

    club. Have worked on a lot of these machines but never had a problem like this.

    The jam code is not helpful because it just tells me what sensor the paper is

    stuck at.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    133
    Rep Power
    0

    Re: Iradv c5051 jam code 0010

    Quote Originally Posted by RHodg57 View Post
    Has anyone had a problem with the one pass document feeder crumpling a corner on a page which causes constant

    jams? The document feed height seems to be set okay. The hard part is seeing where the corners are stubbing their

    club. Have worked on a lot of these machines but never had a problem like this.

    The jam code is not helpful because it just tells me what sensor the paper is

    stuck at.
    Well, my suggestion is you start by forcing a stop (maybe opening the front door immediately half of the paper gets in). Do the same when the paper is fully fed into the machine, when it gets to the image development area and just about when it enters the fuser unit etc.
    My expectations are any of a foreign object (such as a torn piece of paper or anything like that) in the paper path, a disengaged part, or at worst it can be a raised or sunken dent on a surface in the path.
    I hope you get round it buddy!

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Dec 2013
    Location
    Plymouth, IN
    Posts
    173
    Rep Power
    14

    Re: Iradv c5051 jam code 0010

    The problem is in the document feeder not the copier. I am going to recheck alignment and the height adjustment.

    it was the height adjustment. RTFM on this one. Had not ever had to mess with that adjustment on this model.
    Last edited by RHodg57; 2 Weeks Ago at 03:35 PM.

  4. #4
    Field Supervisor 500+ Posts tinnyjay's Avatar
    Join Date
    Oct 2009
    Location
    Tirana
    Posts
    628
    Rep Power
    0

    Re: Iradv c5051 jam code 0010

    Quote Originally Posted by RHodg57 View Post
    Has anyone had a problem with the one pass document feeder crumpling a corner on a page which causes constant

    jams? The document feed height seems to be set okay. The hard part is seeing where the corners are stubbing their

    club. Have worked on a lot of these machines but never had a problem like this.

    The jam code is not helpful because it just tells me what sensor the paper is

    stuck at.
    You have a small paper stucked there. Remove all plastics one by one and you will find it. Or could be a small plastic deviance somewhere.
    "Who loves the roses,must also bear thumbs"

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here