This is a good one...traded in a Canon IR6255 and the only thing that lights up is power and energy save button...looks like HDD is in but what else can it be?
Thanking all of you in advance.
Doug
This is a good one...traded in a Canon IR6255 and the only thing that lights up is power and energy save button...looks like HDD is in but what else can it be?
Thanking all of you in advance.
Doug
Removing and reistall Main Controller PCB 1
Hello There!
I removed and reinstalled main PCB and still no results...do you have any other ideas?
Thanking you in advance,
Doug
Run controller/boot diagnostics. Open all doors,drawers,etc before trying to boot. Could be bad main con
Normally it's the main controller with these symptoms. Make sure you swap over all the boards from the old one to the new one when you replace it.
Accidents don't just happen. They must be carelessly planned.
Bookmarks