Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Apr 2014
    Posts
    115
    Rep Power
    22

    Imagepress c1000vp(E0005f1-8000-02)

    Hi
    facing an error E0005f1-8000-02 in a booklet finisher An2.

    Issue :saddle fold and stapling is not in right position so tried to adjust in a new machine installed couple of weeks before.

    Action takenid the saddle fold adjust through dip switch ,after adjustment got 5 set booklet with saddle stich stapling ,then suddenly error started to appear.

    *Checked the saddle feed motor in service mode it’s ok.
    *As per the manual don’t have the saddle assembly so replaced saddle stich controller but error remain,then replaced the finisher controller still error remains.

    *machine was updated to the lasted version of firmware and finisher controller version also the latest one .

    Please share suggestion
    Last edited by gksapple; 02-17-2020 at 05:27 AM. Reason: Spelling mistake

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Apr 2014
    Posts
    115
    Rep Power
    22

    Re: Imagepress c1000vp(E0005f1-8000-02)

    Quote Originally Posted by gksapple View Post
    Hi
    facing an error E0005f1-8000-02 in a booklet finisher An2.

    Issue :saddle fold and stapling is not in right position so tried to adjust in a new machine installed couple of weeks before.

    Action takenid the saddle fold adjust through dip switch ,after adjustment got 5 set booklet with saddle stich stapling ,then suddenly error started to appear.

    *Checked the saddle feed motor in service mode it’s ok.
    *As per the manual don’t have the saddle assembly so replaced saddle stich controller but error remain,then replaced the finisher controller still error remains.

    *machine was updated to the lasted version of firmware and finisher controller version also the latest one .

    Please share suggestion
    Symptom : Error code E5f1-8000-02 & E567-8002-02
    After dip switch adjustment for saddle staple position .
    Cause :Finisher front door switch assembly spring out of position or broken

    The Spring fu2-1574 holding the front door switch fm2-5751 if the spring is broken or out position below errors will appear.
    1.If it’s a saddle stich finisher error would be- E5f1-8000-02.
    2.If it is staple finisher error would be-E567-8002-02.

    Replaced the front door assembly sensor spring fu2-1574 issue sorted out
    FRONT DOOR ASSY SWITCH.jpgFRONT DOOR ASSY SWITCH.jpg

    thanks
    Gksapple

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here