Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Technician Nizam HS's Avatar
    Join Date
    Mar 2020
    Location
    Heaven On Earth
    Posts
    13
    Rep Power
    1

    Lightbulb canon ir5051 cant start normal.Just green light only

    Hello...any suggest to solve this problem..i was change all supply power board (Ac driver,all night power,main controller 1..it still same,😭

  2. #2
    Service Manager 5,000+ Posts
    canon ir5051 cant start normal.Just green light only

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    7,911
    Rep Power
    166

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Nizam HS View Post
    Hello...any suggest to solve this problem..i was change all supply power board (Ac driver,all night power,main controller 1..it still same,😭
    what troubleshooting methods led you to replace ALL those boards?

    did you even look at the HDD?

    are you a trained Canon tech?

  3. #3
    Copier Technician 250+ Posts
    canon ir5051 cant start normal.Just green light only

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    386
    Rep Power
    38

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Nizam HS View Post
    Hello...any suggest to solve this problem..i was change all supply power board (Ac driver,all night power,main controller 1..it still same,😭
    Why would you start fitting boards. You should of start asking questions 1st if could be as simple as a hard drive problem

  4. #4
    Technician Nizam HS's Avatar
    Join Date
    Mar 2020
    Location
    Heaven On Earth
    Posts
    13
    Rep Power
    1

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by mga View Post
    Why would you start fitting boards. You should of start asking questions 1st if could be as simple as a hard drive problem
    HDD...??but what about the sound came out from power supply area,its like clicking-clicking

  5. #5
    Technician Nizam HS's Avatar
    Join Date
    Mar 2020
    Location
    Heaven On Earth
    Posts
    13
    Rep Power
    1

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Phil B. View Post
    what troubleshooting methods led you to replace ALL those boards?

    did you even look at the HDD?

    are you a trained Canon tech?
    About the sound like clikk,clikk?

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    156
    Rep Power
    0

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Nizam HS View Post
    About the sound like clikk,clikk?
    Yeah! I go with Phil B. Even if there is a sound like that, it is better to be adventurous a bit. Did You open the back of the machine, and turn the machine on to see exactly where the sound was coming from? Was it coming from the power board, or any of the boards you changed? That unusual sound is mostly the sound of a dying HDD. But if your situation is different, did the clicking sound go when you changed the boards? If it did not, then look for a culprit that is more of mechanical than electronic.

  7. #7
    Service Manager 5,000+ Posts
    canon ir5051 cant start normal.Just green light only

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    7,911
    Rep Power
    166

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Nizam HS View Post
    About the sound like clikk,clikk?
    HDD make click click click sound too!

    do you even work on these units for a living ?

  8. #8
    Technician Nizam HS's Avatar
    Join Date
    Mar 2020
    Location
    Heaven On Earth
    Posts
    13
    Rep Power
    1

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Andyboachie View Post
    Yeah! I go with Phil B. Even if there is a sound like that, it is better to be adventurous a bit. Did You open the back of the machine, and turn the machine on to see exactly where the sound was coming from? Was it coming from the power board, or any of the boards you changed? That unusual sound is mostly the sound of a dying HDD. But if your situation is different, did the clicking sound go when you changed the boards? If it did not, then look for a culprit that is more of mechanical than electronic.
    Dying HDD...i was change it,but still same ..On the suis but still only green light appear,and blank panel

  9. #9
    Technician Nizam HS's Avatar
    Join Date
    Mar 2020
    Location
    Heaven On Earth
    Posts
    13
    Rep Power
    1

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Phil B. View Post
    HDD make click click click sound too!

    do you even work on these units for a living ?
    Now,after i changing the supply board,the sound click click was gone..so confuse,but still same,the machine cant run normaly..

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    156
    Rep Power
    0

    Re: canon ir5051 cant start normal.Just green light only

    Quote Originally Posted by Nizam HS View Post
    Dying HDD...i was change it,but still same ..On the suis but still only green light appear,and blank panel
    Once it is a sound that repeats itself, open the back look closely/listen carefully. You'll surely find at least the source of the sound. Also, you may find it useful to check at the fixing unit, since that area may generate such sound after a wear gears.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here