Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: Imagepress c800

  1. #1
    Technician
    Join Date
    Jan 2020
    Location
    beirut
    Posts
    19
    Rep Power
    9

    Imagepress c800

    Hello
    I have an imagepress C800 with a finisher AM1 , I bought it used I tried to connect the finisher but its not working but if I remove it using only the collect tray it work just fine, I connect the finisher with crossover cable and a power cable plugged direct to 220v . is there and function in the service mode I should enable the finisher or its just plug and play.
    thanks

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Apr 2014
    Posts
    115
    Rep Power
    22

    Re: Imagepress c800

    Quote Originally Posted by pnai View Post
    Hello
    I have an imagepress C800 with a finisher AM1 , I bought it used I tried to connect the finisher but its not working but if I remove it using only the collect tray it work just fine, I connect the finisher with crossover cable and a power cable plugged direct to 220v . is there and function in the service mode I should enable the finisher or its just plug and play.
    thanks
    Hi
    first check the finisher is detected or not . check the accesories status in the service mode.

    COPIER (Service mode for printer) > DISPLAY (State display mode) > ACC-STS

    SORTER 1 Dspl Fin-related option connection state
    Detail To display which finisher-related option is connected.
    Use Case When checking the connection of Finisher-related options
    Adj/Set/Operate Method N/A (Display only)
    Display/Adj/Set Range Left column (connection state of Finisher-related options): 1 to 5
    1: Without Saddle
    2: With Saddle, without Folding Unit
    3: With Saddle and Inserter, without Folding Unit
    4: With Saddle and Folding Unit, without Inserter
    5: With Saddle, Inserter and Folding Unit


    if no sorter is available then the connection between finisher and host machine .

    thanks
    gks

  3. #3
    Technician
    Join Date
    Jan 2020
    Location
    beirut
    Posts
    19
    Rep Power
    9

    Re: Imagepress c800

    Thank you very much for the reply
    There is nothing show's in the service mode for the sorter or finisher only in the display it is 0.
    Could you please send me the cable connection diagram between the finisher and the machine.
    Many thanks

  4. #4
    Senior Tech 100+ Posts khattab.al.masry's Avatar
    Join Date
    Jan 2014
    Posts
    212
    Rep Power
    0

    Re: Imagepress c800

    check power supply board for finisher is installed

  5. #5
    Technician
    Join Date
    Sep 2017
    Posts
    18
    Rep Power
    14

    Re: Imagepress c800

    the finisher should be connected with a straight cable, not crossover.

  6. #6
    Technician
    Join Date
    Jan 2020
    Location
    beirut
    Posts
    19
    Rep Power
    9

    Re: Imagepress c800

    This is the back side of the finisher,
    The network cable is connected to the machine with the same stickers sign and down on the power plug I connected to 220v still not work and not showing on the screen and I used a straight cable still not shows.

    Thanks a lot
    Attached Images Attached Images

  7. #7
    Senior Tech 100+ Posts khattab.al.masry's Avatar
    Join Date
    Jan 2014
    Posts
    212
    Rep Power
    0

    Re: Imagepress c800

    Quote Originally Posted by khattab.al.masry View Post
    check power supply board for finisher is installed
    Sorry;
    These type of finisher not needed to power supply board.

    Sent from my CPH2015 using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here