Originally Posted by
beaker020
Default is : [Settings/Registration] - Pressing [2] and [8] at the same time - [Settings/Registration]
An alternative setting is :[Settings/Registration] - Pressing [4] and [9] at the same time - [Settings/Registration]
Change the setting in service mode COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW >SVMD-ENT
2 Setting of entry method to service mode
Detail To set the way to get in service mode to prevent information leak.
Use Case As needed
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Factory default
1: [Settings/Registration] - Pressing [4] and [9] at the same time - [Settings/Registration]
Bookmarks