Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Mar 2006
    Posts
    52
    Rep Power
    29

    Canon tiered billing.

    I am sure I've seen it somewhere. Where you can bill a different rate for low coverage color prints. Kyocera has it and I swear I've seen it somewhere for Canon too but I cant seem to find any documentation on it. I'm working from home for the next little bit so I dont have access to a copier at the moment.

    Can anyone confirm this or am I imagining things?

    Thanks
    Lance

  2. #2
    Service Manager 10,000+ Posts
    Canon tiered billing.

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,012
    Rep Power
    233

    Re: Canon tiered billing.

    Quote Originally Posted by beaker020 View Post
    I am sure I've seen it somewhere. Where you can bill a different rate for low coverage color prints. Kyocera has it and I swear I've seen it somewhere for Canon too but I cant seem to find any documentation on it. I'm working from home for the next little bit so I dont have access to a copier at the moment.

    Can anyone confirm this or am I imagining things?

    Thanks
    Lance


    If u are billing off meter readings, u can set that up on control panel.
    There are many settings to choose from, paper size, full color, prints, and or copies or both.

    See examples link��

    Dropbox - PrintTracker_-_Gathered_Meter_Reporting_on_Canon_Devices.pdf - Simplify your life

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Engineer senior 50+ Posts giogi's Avatar
    Join Date
    Jan 2016
    Location
    Italy
    Posts
    53
    Rep Power
    9

    Re: Canon tiered billing.

    Well even Canon has its own method.
    Not so functional but only indicative as regards toner coverage (high – medium-low)
    But the MKT doesn’t push him.


    To enable hedge counting
    lev 2 COPIER>OPTION>DSPLY-SW>VC-HIST>1
    COPIER>OPTION>USER>VC-CNT > 1
    COPIER>OPTION>USER>VC-AVE > 1


    To change the thresholds
    COPIER>OPTION>USER>VC-HIGH
    COPIER>OPTION>USER>VC-LOW


    Attention that not all models have this.
    "Knowledge is a source, but unfortunately ignorance is a sea."

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here