This Canon IRC5250 intermittently voids out most of the page except for the edge on one side or the whole image is blank.
Please through out your ideas as I need help.
Thank you folks and stay safe!
Thanks: 0
Likes: 0
Dislikes: 0
This Canon IRC5250 intermittently voids out most of the page except for the edge on one side or the whole image is blank.
Please through out your ideas as I need help.
Thank you folks and stay safe!
Please throw out your ideas. Typo.
Thank you!
Originally Posted by skibum
First thing I would do is update the firmware.
R-CON CLEAR
Check condition of CCD's flat cable
"Knowledge is a source, but unfortunately ignorance is a sea."
Does this issue occur only on scanning or when copying also?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Through feeder? Off the glass? Need more info....
Exactly limited info not much help 🙄
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Delivered one, about month ago, customer called next day, scanning only half a copy, single side only, not when duplexing, replaced feeder from parts 5250, problem solved, had to charge them, feeder dropped too hard, scanning optical damaged on feeder. As for your problem, is it one sided? Or duplex side?
Reply With Quote
Bookmarks