It all started when I reset the maintenance tank, 3 days went by giving a warning during each print, the machine stopped and stayed 5 minutes making noise, "ERROR 2F71" I researched what this code was and found out what about the cartridges on the left side (colored), I changed the chips of the three anyway the error continued, I removed my head to clean the contacts, everything was clean test print 100%, I managed to do a test of the colors and was without any failure, but now when you turn on the printer it does the procedure of loading the ink when you change your head and then fall into error 2f71, what you need to turn off and on, and start all over again load the inks of the error just shutting down to fall back into the error cycle, something different I got today was to enter in SERICE MODE, which gives you the ability to print all tests, it's 100% head but you can't accept printing from the computer
Bookmarks