Results 1 to 8 of 8
  1. #1
    Senior Tech 250+ Posts
    iR C2020 error E074-0000


    Join Date
    Apr 2012
    Location
    Brisbane
    Posts
    349
    Rep Power
    28

    iR C2020 error E074-0000

    hello everyone

    i know this is an ITB disengagement error, i have both the service and parts manuals, but for the life of me i cannot see where SW01 is nor SL01

    machine was printing blanks, then came up with the error, managed to get rid of the error temporarily and did a stop test - image on drum but not ITB

    machine has done only 44k prints and with the top cover off i can see the ITB disengagement coupling rotate, but it stops in a different position every time

    can anyone tell me where the switch and solenoid are?

    thanks in advance

  2. #2
    Service Manager 10,000+ Posts
    iR C2020 error E074-0000

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: iR C2020 error E074-0000

    Quote Originally Posted by aAandy View Post
    hello everyone

    i know this is an ITB disengagement error, i have both the service and parts manuals, but for the life of me i cannot see where SW01 is nor SL01

    machine was printing blanks, then came up with the error, managed to get rid of the error temporarily and did a stop test - image on drum but not ITB

    machine has done only 44k prints and with the top cover off i can see the ITB disengagement coupling rotate, but it stops in a different position every time

    can anyone tell me where the switch and solenoid are?

    thanks in advance


    May find Info here

    Canon IRC 2030 E000074-0000
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Senior Tech 250+ Posts
    iR C2020 error E074-0000


    Join Date
    Apr 2012
    Location
    Brisbane
    Posts
    349
    Rep Power
    28

    Re: iR C2020 error E074-0000

    Quote Originally Posted by teckat View Post
    May find Info here

    Canon IRC 2030 E000074-0000
    thanks Teckat! ended up attending blind, removed rear covers, waste toner assy, HVT boards, harness, main drive and fuser drive, behind which was the alienation 'lever-type' solenoid, which was sticking due to the foam pad having turned to goo - covered the gooey foam pad with sticky tape, cleaned the lever and all good

    interesting to note: getting the main drive back in and aligned correctly with ITB drive release (and other parts) was 'fun' - took 1.5 hrs all up

  4. #4
    Service Manager 10,000+ Posts
    iR C2020 error E074-0000

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: iR C2020 error E074-0000

    Quote Originally Posted by aAandy View Post
    thanks Teckat! ended up attending blind, removed rear covers, waste toner assy, HVT boards, harness, main drive and fuser drive, behind which was the alienation 'lever-type' solenoid, which was sticking due to the foam pad having turned to goo - covered the gooey foam pad with sticky tape, cleaned the lever and all good

    interesting to note: getting the main drive back in and aligned correctly with ITB drive release (and other parts) was 'fun' - took 1.5 hrs all up

    👍 Work
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Service Manager 5,000+ Posts
    iR C2020 error E074-0000

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: iR C2020 error E074-0000

    Quote Originally Posted by aAandy View Post
    thanks Teckat! ended up attending blind, removed rear covers, waste toner assy, HVT boards, harness, main drive and fuser drive, behind which was the alienation 'lever-type' solenoid, which was sticking due to the foam pad having turned to goo - covered the gooey foam pad with sticky tape, cleaned the lever and all good

    interesting to note: getting the main drive back in and aligned correctly with ITB drive release (and other parts) was 'fun' - took 1.5 hrs all up
    Thank for the info I will make note of this. Those pads Canon use have been failing like this for years shame they are still using the same material.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  6. #6
    Senior Tech 250+ Posts
    iR C2020 error E074-0000


    Join Date
    Apr 2012
    Location
    Brisbane
    Posts
    349
    Rep Power
    28

    Re: iR C2020 error E074-0000

    Quote Originally Posted by copier tech View Post
    Thank for the info I will make note of this. Those pads Canon use have been failing like this for years shame they are still using the same material.
    believe it or not, the first time i performed this "sticky tape" repair on a lever type solenoid was on a HP LJ III, which as you likely know is a canon engine - the repair lasted 10 years before the elderly man finally got rid of it

  7. #7
    Service Manager 5,000+ Posts
    iR C2020 error E074-0000

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: iR C2020 error E074-0000

    Quote Originally Posted by aAandy View Post
    believe it or not, the first time i performed this "sticky tape" repair on a lever type solenoid was on a HP LJ III, which as you likely know is a canon engine - the repair lasted 10 years before the elderly man finally got rid of it
    I remember the C2380 series reg actuator had a tiny pad this would cause a jam first thing in the morning.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #8
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: iR C2020 error E074-0000

    Quote Originally Posted by aAandy View Post
    thanks Teckat! ended up attending blind, removed rear covers, waste toner assy, HVT boards, harness, main drive and fuser drive, behind which was the alienation 'lever-type' solenoid, which was sticking due to the foam pad having turned to goo - covered the gooey foam pad with sticky tape, cleaned the lever and all good

    interesting to note: getting the main drive back in and aligned correctly with ITB drive release (and other parts) was 'fun' - took 1.5 hrs all up
    Yes them drive assemblies are a nightmare to sync...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here