Canon iradv 400i prints from a PC / photocopying well on two sided, but images at the back side are shifted forward leaving a smaller margin. Anybody with such an experience? Please help
Sent from my SM-A505F using Tapatalk
Thanks: 0
Likes: 0
Dislikes: 0
Canon iradv 400i prints from a PC / photocopying well on two sided, but images at the back side are shifted forward leaving a smaller margin. Anybody with such an experience? Please help
Sent from my SM-A505F using Tapatalk
This might help but take note of initial values before you adjust them
Service Mode Adjustment Method (2-sided)
Adjustment of the write start position of image in horizontal scanning direction: 2-sided>
(Lv.1) COPIER> ADJUST> FEED-ADJ> ADJ-REFE
• Adjustment unit: 0.1 mm
• Increase value: Left Margin becomes larger.
Decrease value: Left Margin becomes small
When you think you have made a procedure idiot proof your company employs a better idiot.
Reply With Quote
Bookmarks