Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: iRA 6055

  1. #11
    Trusted Tech 50+ Posts nicknt82's Avatar
    Join Date
    Nov 2011
    Location
    USA
    Posts
    76
    Rep Power
    19

    Re: iRA 6055

    Quote Originally Posted by Apach View Post
    Hello,

    Does anyone know what the problem is? I changed: Drum cleaning blade, pre and primary corona and developing assembly, but problem is not solved. Maybe some parts is not working properly?Attachment 46164 First page is every time is OK but next pages not.Attachment 46164
    Thanks on advice.

    Check or Fixing Upper Roller, It catch toner and preprint on image

  2. #12
    Senior Tech 100+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    235
    Rep Power
    22

    Re: iRA 6055

    Quote Originally Posted by Apach View Post
    Hello,

    Does anyone know what the problem is? I changed: Drum cleaning blade, pre and primary corona and developing assembly, but problem is not solved. Maybe some parts is not working properly?Attachment 46164 First page is every time is OK but next pages not.Attachment 46164
    Thanks on advice.
    From the look at your copies,there is no constant flow of current from the HVT board(pcb).
    I would suggest you look at the HVT board for possible dry contacts basing on the number of
    copies your machine has made.
    Secondly the connector of the blank lamps.
    When you perform a test print from the copier does the copy still give varriations in print?
    If so look at the factors above

  3. #13
    Senior Tech 100+ Posts
    iRA 6055


    Join Date
    Nov 2010
    Posts
    151
    Rep Power
    0

    Re: iRA 6055

    At the moment I have a lot of jobs and don't have time for repair. I ordered all new parts again because I have 4 same machine(parts is always needed ) and next week I try to change parts by parts and again check PCB. I post results here when I finish. Again, thanks for your advice guys.
    There is no stupid question, just stupid answer

  4. #14
    Junior Member
    Join Date
    Dec 2020
    Location
    Beirut
    Posts
    9
    Rep Power
    0

    Re: iRA 6055

    Hello,
    I dont know if you fixed the problem or still.
    The issue seems from the Etb assembly ( the text is being reprinted ), better change brush and the blade first with cleaning the etb assembly rollers , if not solved you can try the belt also.
    For the top issue if its not solved along with the above parts , it could be related to the drum since it looks like the drum surface.

  5. #15
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    414
    Rep Power
    0

    Re: iRA 6055

    It looks like charge to me

  6. #16
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    414
    Rep Power
    0

    Re: iRA 6055

    Also machine rotates toner bottle.
    The part that has the crack is Stopper, bottle link inner door (FCB-4692-000). cAN IT CAUSE THE PROBLEM?

  7. #17
    Technician
    Join Date
    Nov 2020
    Location
    Belgrade
    Posts
    15
    Rep Power
    0

    Re: iRA 6055

    If issue is ghost araund letter, it can be bad toner... clean dev units, use OEM toner and see difference.

  8. #18
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    176
    Rep Power
    0

    Re: iRA 6055

    Quote Originally Posted by Apach View Post
    Hello,Does anyone know what the problem is? I changed: Drum cleaning blade, pre and primary corona and developing assembly, but problem is not solved. Maybe some parts is not working properly?Attachment 46164 First page is every time is OK but next pages not.Attachment 46164Thanks on advice.

    What is the situation of the cleaning web and the upper fixing roller? Expect this output if the web is dirty or not cleaning. The fact that the problem occurs at the trailing part of the copy seems to imply a particular area of the drum can cause this too. So my suspicions are the drum and the fixing roller.

  9. #19
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,610
    Rep Power
    51

    Re: iRA 6055

    Check if your pre-exposure LED is coming on. It's mounted in the cleaner blade assembly. It's connector is the one that you disconnect to remove the cleaner blade assembly. Probably forgot to plug it back in.

  10. #20
    Service Manager 1,000+ Posts
    iRA 6055

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,361
    Rep Power
    52

    Re: iRA 6055

    Good point. Been there.
    Quote Originally Posted by Canuck View Post
    Check if your pre-exposure LED is coming on. It's mounted in the cleaner blade assembly. It's connector is the one that you disconnect to remove the cleaner blade assembly. Probably forgot to plug it back in.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here