imageRUNNER ADVANCE 8105 / 8095 / 8085 / 6075 / 6065 / 6055


Is it possible to move the SATA FLASH PCB from one machine to another machine?




No. Never move the SATA-FLASH PCB from one machine to another.

The Flash Board is a component that is matched to the machine it comes with and can not be moved to another machine.

CAUTION:
The second-hand FLASH PCB cannot be used in another machine. If the FLASH PCB is moved to another machine an E748-9xxx will be displayed.
By installing the FLASH PCB into another machine and turning on the power, the machine specific information will be written in the PCB automatically.

ADVANCE 6275 / 6265 / 6255
Sata Flash PCB. The part number for the Sata Flash is FM4-2488-010.



The following photo shows the location of the Flash Board on Main Controller PCB 1.

Left Main 1 > lower right side bottom edge of pcb.