Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Sep 2020
    Location
    Horsham
    Posts
    3
    Rep Power
    0

    Canon Image Runner 4245 Jamming

    I have a customer with a canon ir4245 that is jamming when duplexing. Single sided prints are fine. After the jam there is always paper sitting mostly in the No 2 delivery assembly and just a bit would have been in the duplexing guide assembly. The jam code is: 00 010D DELAY S7 Duplex feed sensor

    Any thoughts on why and how to fix?

  2. #2
    Service Manager 1,000+ Posts
    Canon Image Runner 4245 Jamming

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,330
    Rep Power
    51

    Re: Canon Image Runner 4245 Jamming

    There is a belt in the 3 way unit that may have popped off. If you pull the unit it should be easy to see.


    Sent from my iPhone using Tapatalk

  3. #3
    Junior Member
    Join Date
    Sep 2020
    Location
    Horsham
    Posts
    3
    Rep Power
    0

    Re: Canon Image Runner 4245 Jamming

    I forgot to add a lot of times a piece of paper will be sitting in between the adf assembly and the output bin. Not sure how it gets there. Is the 3 way unit the internal finisher??

  4. #4
    Service Manager 1,000+ Posts
    Canon Image Runner 4245 Jamming

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,330
    Rep Power
    51

    Re: Canon Image Runner 4245 Jamming

    No. Itís above the right side door. Should be 4 screws and a connector.


    Sent from my iPhone using Tapatalk

  5. #5
    Copier Technician 500+ Posts
    Canon Image Runner 4245 Jamming

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    680
    Rep Power
    68

    Re: Canon Image Runner 4245 Jamming

    Quote Originally Posted by lbotto View Post
    I have a customer with a canon ir4245 that is jamming when duplexing. Single sided prints are fine. After the jam there is always paper sitting mostly in the No 2 delivery assembly and just a bit would have been in the duplexing guide assembly. The jam code is: 00 010D DELAY S7 Duplex feed sensor

    Any thoughts on why and how to fix?
    Look in the area could be dirty sensor
    Attached Images Attached Images

  6. #6
    Junior Member
    Join Date
    Sep 2020
    Location
    Horsham
    Posts
    3
    Rep Power
    0

    Re: Canon Image Runner 4245 Jamming

    So I replaced the entire right door and still jamming when duplexing. Any other thoughts??

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here