Canon Ir6055

[miki32]

Please help, does anyone have any idea how to solve the problem behind the lines along the edge of the paper?

[Brian8506]

What have you done? Retire Coronas. Transfer belt? Clean out laser?


Sent from my iPhone using Tapatalk

[miki32]

What have you done? Retire Coronas. Transfer belt? Clean out laser?


Sent from my iPhone using Tapatalk

Replaced the Primary Corona Assembly, belt, drum blade, I noticed that when I lift the corona wires the printout is clean but only 20 pages, after that the lines come back again.

[Brian8506]

I’ve had mysterious lines that were laser related. Pulled laser and cleaned. Also laser slit glass above drum. Assuming all optics are clean and door specs right


Sent from my iPhone using Tapatalk

[Brian8506]

Another thought. On top of the dv unit are 2 brass contacts. Bend them up a little to make better contact inside the copier. I've solved a few odd cq issues with that.

[miki32]

I’ve had mysterious lines that were laser related. Pulled laser and cleaned. Also laser slit glass above drum. Assuming all optics are clean and door specs right


Sent from my iPhone using Tapatalk

I cleaned the glass above the drum, I will try to clean the laser tomorrow, I will report the results. Thanks, Brian

[Brian8506]

Try dv first. Quicker

[mc007]

What have you done? Retire Coronas. Transfer belt? Clean out laser?


Sent from my iPhone using Tapatalk

try to adjust corona height!!!