Results 1 to 10 of 10
  1. #1
    Technician lalynbb's Avatar
    Join Date
    Sep 2020
    Location
    Johor
    Posts
    12
    Rep Power
    1

    ir 7095 power on machine keep on jamming at the fuser roller.

    I have changed the sensor PS10, PS9, PS6 and clutch and gear below the fuser unit.
    but still the same problem, Thanks for help.
    Jam code : 0A1A
    Attached Images Attached Images

  2. #2
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    2,701
    Rep Power
    125

    Re: ir 7095 power on machine keep on jamming at the fuser roller.

    If it jam constantly at fuser roller then check fuser rollers drive. Usually drive gear boss is broken or gear itself. Speaking of other brands(non Canon) I normally work on.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  3. #3
    reliable tech
    Join Date
    Jan 2019
    Location
    berlin
    Posts
    26
    Rep Power
    0

    Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Quote Originally Posted by lalynbb View Post
    I have changed the sensor PS10, PS9, PS6 and clutch and gear below the fuser unit.
    but still the same problem, Thanks for help.
    Jam code : 0A1A

    check fuser upper roller and drive gears , part no: FS7-0007-000,FS7-0006-000

  4. #4
    Technician lalynbb's Avatar
    Join Date
    Sep 2020
    Location
    Johor
    Posts
    12
    Rep Power
    1

    Smile Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Quote Originally Posted by tsbservice View Post
    If it jam constantly at fuser roller then check fuser rollers drive. Usually drive gear boss is broken or gear itself. Speaking of other brands(non Canon) I normally work on.


    Thank you. I will try it

  5. #5
    Technician lalynbb's Avatar
    Join Date
    Sep 2020
    Location
    Johor
    Posts
    12
    Rep Power
    1

    Thumbs up Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Quote Originally Posted by mc007 View Post
    check fuser upper roller and drive gears , part no: FS7-0007-000,FS7-0006-000
    thanks I will try this out.

  6. #6
    Technician lalynbb's Avatar
    Join Date
    Sep 2020
    Location
    Johor
    Posts
    12
    Rep Power
    1

    Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Quote Originally Posted by lalynbb View Post
    thanks I will try this out.
    all the gear at fuser or upper roller is ok. but the problem still the same,any suggestion?

  7. #7
    reliable tech
    Join Date
    Jan 2019
    Location
    berlin
    Posts
    26
    Rep Power
    0

    Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Quote Originally Posted by lalynbb View Post
    all the gear at fuser or upper roller is ok. but the problem still the same,any suggestion?


    jam code ?

  8. #8
    Field Supervisor 500+ Posts
    ir 7095 power on machine keep on jamming at the fuser roller.

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    505
    Rep Power
    26

    Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Do you know for sure that the fuser is turning during normal operation? I used to put a mark on the the lower fuser roller with a sharpie to verify it's turning. Also, have you checked all the relevant sensors to make sure they change states from 1 to 0?

  9. #9
    Technician lalynbb's Avatar
    Join Date
    Sep 2020
    Location
    Johor
    Posts
    12
    Rep Power
    1

    Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Quote Originally Posted by mc007 View Post
    jam code ?
    Jam code : 010A

    now the paper jam is mising
    but i'm facing fuser unit is toooo hot
    until cannot turn on the machine
    Iíve change the 2unit gear (52T and 25&75T)

  10. #10
    Technician lalynbb's Avatar
    Join Date
    Sep 2020
    Location
    Johor
    Posts
    12
    Rep Power
    1

    Re: ir 7095 power on machine keep on jamming at the fuser roller.

    Quote Originally Posted by BillyCarpenter View Post
    Do you know for sure that the fuser is turning during normal operation? I used to put a mark on the the lower fuser roller with a sharpie to verify it's turning. Also, have you checked all the relevant sensors to make sure they change states from 1 to 0?
    Noted, great idea! next time i can try to use your skill to make sure it.
    i changed all sensors around fuser unit. but still the same.
    After that I changed whole unit from other machine, then it work as well.
    But now another problem come, upper fuser roller unit is too hot.
    the machine keep on restart.......
    do you have any idea for me?
    Thanks a lot~~~~

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here