Hi to all!
Maybe someone has figured out how to print a complete counter (all counters) like P-print or similar. I need it on IPC-750.Thanks.
Hi to all!
Maybe someone has figured out how to print a complete counter (all counters) like P-print or similar. I need it on IPC-750.Thanks.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
As far as I know, it is not possible to print all counters reports
If the machine is connected to eMaintenance service, by connecting with your mobile phone and launching the eMaintenance for Mobile APP, you can view all the counters.
"Knowledge is a source, but unfortunately ignorance is a sea."
Thanks G but machine is not in the network.I also believe there is no possibility of a printout.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
So if the plotter won't print, and it's not on a network to view the web interface, you'll have to stand in front of the machine, and browse the menu. If it comes up in error, you can still boot in service mode, then browse the menu.
You could connect to your laptop, then browse the web interface. I've done this before when the display was unreadable. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks D.
It's proffesional laser printer with rip.Not a ploter.
The customer does not have a network with internet access so I cannot look through e-maintenance for monthly bill.
The classic counter does not have a banner1300mm counter.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
To enable the banner set the following item in the assistance modes: Lev2 COPIER>OPTION>USER>MF-LG-ST = 1
The format sizes that can be set by by-pass go from 98-457 to 98-1200
Enable in service modes COPIER>OPTION>USER the counters
471 - long format
472 - full colour banner
473 - B/W banner
474 - mono colour banner
"Knowledge is a source, but unfortunately ignorance is a sea."
Sorry, I mis-read IPC as IPF. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Bookmarks