How to remove laser unit of IR adv c7260

[tomson25]

Hi friends,
If any body have documentation for laser unit removal of IR adv c7260.plese share it.

[Phil B.]

Hi friends,
If any body have documentation for laser unit removal of IR adv c7260.plese share it.

it's in the service manual . you will need that for adjustments after the install.

[copier tech]

Hi friends,
If any body have documentation for laser unit removal of IR adv c7260.plese share it.

If you don't have the service manful for this model you should not be working on it.

Drop us an email if you need it.

Firmware Update - Printer & Copier Firmware

[tomson25]

This is my email - tomson25@gmail.com

[Phil B.]

This is my email - tomson25@gmail.com

No he said DROP them an email..meaning CONTACT HIM!

Sent from my SM-G960U using Tapatalk

[Lewis-H]

Press (Settings/Registration) → [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder].
Place 10 sheets of blank paper into the feeder → press [Start].
Make sure that you fan the sheets of paper well.
Use normal LTR paper.
When cleaning is complete, try scanning again.
NOTE
To cancel feeder cleaning while it is in progress, press [Cancel].
Wire Cleaning
If streaks appear on printed output or random parts of the printed image are missing, clean the corona assembly wires inside the main unit.
NOTE
It takes approximately 35 seconds to clean the wires.
Wire cleaning cannot be performed during printing.

[khattab.al.masry]

Here what you want and in public my friend.

[khattab.al.masry]

Mr phil
Hi mr reputation
What about the evaluation after my contribution.


Sent from my CPH2015 using Tapatalk

[Phil B.]

Press (Settings/Registration) → [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder].
Place 10 sheets of blank paper into the feeder → press [Start].
Make sure that you fan the sheets of paper well.
Use normal LTR paper.
When cleaning is complete, try scanning again.
NOTE
To cancel feeder cleaning while it is in progress, press [Cancel].
Wire Cleaning
If streaks appear on printed output or random parts of the printed image are missing, clean the corona assembly wires inside the main unit.
NOTE
It takes approximately 35 seconds to clean the wires.
Wire cleaning cannot be performed during printing.

irrelevant

he's asking for REMOVAL docs... you seem to be posting BS just to up your numbers... we are on to you.

[Phil B.]

Mr phil
Hi mr reputation
What about the evaluation after my contribution.


Sent from my CPH2015 using Tapatalk

what contribution? you mean the PDF?

comments like this needs no evaluation