Canon ir5050 vertical black stripe on edge

[ernesto2019]

when I copy through the ADF I get that black line and when I copy through the glass it doesn't give me that problem

[Phil B.]

when I copy through the ADF I get that black line and when I copy through the glass it doesn't give me that problem

run ADF adjustments...

is it copying at 100%?

all guides tight on originals ?

[ReproKev]

when I copy through the ADF I get that black line and when I copy through the glass it doesn't give me that problem

Clean the small glass to the left of the main copyboard glass. It probably has whiteout on it.

[Brian8506]

Looks like a bad skew


Sent from my iPhone using Tapatalk

[1stcavvet]

If you did't find it yet look for something hanging down just under the slit between the slit glass and main glass

[Brian8506]

I think it's so badly skewed that it's copying the edge of the paper. I would check the position of the ADF

[ernesto2019]

I already cleaned the glass and the ADF and I always get the black streak on the edge

[Brian8506]

It’s skewed and doc stop needs to be adjusted.


Sent from my iPhone using Tapatalk

[mga]

when I copy through the ADF I get that black line and when I copy through the glass it doesn't give me that problem

This is a skew problem check side guide and DF unit is not skew on machine and check hinges.

There is a skew adjustment for the df

[ernesto2019]

This is a skew problem check side guide and DF unit is not skew on machine and check hinges.

There is a skew adjustment for the df

So I get the copy, I already cleaned ADF, the glass and I do not know what guide I can review