Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts Arcadian's Avatar
    Join Date
    Feb 2010
    Posts
    192
    Rep Power
    24

    I have a Canon ir8505

    Turning it on, the power light comes on, then the Energy saver light comes and start pulsating, the copier does it dance, but nothing on the screen.
    unplugged the copier for 5 minutes, same results after turning it on, holding #28 button resulted in nothing, same pulsating energy light, sometime it'll stop maybe flashes 5 or 6 times
    I wonder if anyone seen this happened to a 8505 machine..

    Any suggestions is appreciated .

    Thanks

  2. #2
    Technician oombees's Avatar
    Join Date
    Apr 2016
    Posts
    23
    Rep Power
    10

    Re: I have a Canon ir8505

    One of three things you could check.

    1. Main Controller 1 and 2
    2. HDD
    3. Engine Board.

    I had at least one of these three go haywire before.

    Sent from my SM-G985F using Tapatalk

  3. #3
    Senior Tech 100+ Posts Arcadian's Avatar
    Join Date
    Feb 2010
    Posts
    192
    Rep Power
    24

    Re: I have a Canon ir8505

    Quote Originally Posted by oombees View Post
    One of three things you could check.

    1. Main Controller 1 and 2
    2. HDD
    3. Engine Board.

    I had at least one of these three go haywire before.

    Sent from my SM-G985F using Tapatalk

    Thank will look into these.
    I had changed the HDD, possible it failed, did work for a year so maybe it was a bad hdd.

    thanks ill remove to see if it boots up at least that should tell me for sure.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here