Is there a master master here who has a flow chart from the Canon IR 4570 power supply, I have a case of a total dead machine, all parts of the power supply, mainboard, DC control, etc. have been replaced, still no movement at all
Is there a master master here who has a flow chart from the Canon IR 4570 power supply, I have a case of a total dead machine, all parts of the power supply, mainboard, DC control, etc. have been replaced, still no movement at all
if you have the green LED on, in the technical manual Rev.10, in chapter 6 Troubleshooting, there is the chapter Startup System Failure Diagnosis, you will find a flowchart for your problem.
"Knowledge is a source, but unfortunately ignorance is a sea."
I presume you checked cable also power button .
Did you check on the wiring? If so you are supposed to get the following out puts from the power supply ie 24v,12v,5v and 3.5v.
Another possible question what happens when you switch on the machine? Do notice any hissing sound indicating the presence of power,is the circuit braker at the back of the machine turned on?
if so critically look at the wiring of any possible damages
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks