CLC 3220 maybe brick

[skynet]

until now i understand that the machines with was delivered with a firey has not boot rom, is this right?

No the 3220 has a copier bootrom try the bootrom from the 2620.

why don´t clone harddrives?
unfortunately i don´t have any support software to install a new harddrive.

Canon copiers require certain hard drives. Cloning a copier hard drive to one of the same brand and size might work but anything else might not.

[Michael]

it seems i have good news....

i switch on copier on main switch and with 1+7 for fixip..... now the copier works normally... with old parts nothing changed...

how should i go further?

1. how i can set up ip adress in copier?
2. is the fiery necessary for printing postscript?

i wish to update the machine to the latest software and firmware.. and even fix the fiery to work again.
who can help me with this?

[Michael]

more good news....

i setup an ipadress in copier clc3220 and can connect with webfrontend Remote UI.
But printing not work... even with new installed driver...

[skynet]

more good news....

i setup an ipadress in copier clc3220 and can connect with webfrontend Remote UI.
But printing not work... even with new installed driver...

That's because its a copier bootrom.

[Michael]

That's because its a copier bootrom.

the 2620 machines also comes with fierys... do you think they have then a networkbootrom ?

is it possible to flash the bootrom for working as a printer?

[skynet]

No and no, as for the question on copy defaults
Setting Default Copy Settings on Canon IRC2380 - YouTube

[Michael]

No and no, as for the question on copy defaults
Setting Default Copy Settings on Canon IRC2380 - YouTube

thanks for link... found solution already...

[Michael]

another question:how can i wipe every stored dokument on the hdd?

[Michael]

so good news , as many people helped me to fix the problem now the machine and another fiery c1 is working. only one thing is left: fax is missing and i not know how to enable . under DISPLAY the field from fax is empty.

if anybody need servicemanuals ask me maybe i have it. Most of my service manual are older ones but maybe useful. (printer, copier, computer, laptop, radio, audio, monitor and others)

[skynet]

so good news , as many people helped me to fix the problem now the machine and another fiery c1 is working. only one thing is left: fax is missing and i not know how to enable . under DISPLAY the field from fax is empty.

As well as the fax pcb you need the Resolution Switching Board-A2 (iR-C3220/2620): 8202A002AA

You can see a picture of it here

email functions canon irC3220