canon ir c5250 prints solid yellow with the print still visible
canon ir c5250 prints solid yellow with the print still visible
replaced drum and developer, only OEM toner, when it happens it looks like she prnted on yellow paper, 1 error code E020 01B1, error has not come back after repacement of Y Dev
Then the drum ground is bad?, swap yellow drum with magenta drum to see if problem follows drum.
IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications
Need to print out the internal test charts that shows all the individual colors. Post 'em when you do that. Thanks.
There's a ground tab under the drum on the frame. Make sure it is making solid contact with the drum assembly.
Accidents don't just happen. They must be carelessly planned.
went back this afternoon, cleaned all contacts for Y drum and Y Dev. same proplem. Swapped Y drum with M drum problem went away, so it's a contact problem. Reminder it was a brand new Y drum. test page #10 perfect. Will repost any changes next week.
Thanks for feedback and suggestions !
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Bookmarks