Thanks: 
Likes: 
Dislikes: In an ir 3245 image like this.Both copy and print out, l replaced dc controller,main controller,HDD, hv power supply and laser unit, but still the same fault.Some time no problem,please give the suggestions.
Sent from my Redmi Note 7 using Tapatalk
In an ir 3245 image like this.Both copy and print out, l replaced dc controller,main controller,HDD, hv power supply and laser unit, but still the same fault.Some time no problem,please give the suggestions.
Sent from my Redmi Note 7 using Tapatalk
Have you done anything with the drum or fuser yet? Is the image fused? Is that ltrr direction?
Yes, replaced fuser filim and drum ,it is A4 direction.
Sent from my Redmi Note 7 using Tapatalk
Image is fused, problem only some time .
Sent from my Redmi Note 7 using Tapatalk
It looks like Fuser unit or a developer to me. Did you replace just the film or the upper film assembly? Possible bad Toner? Possible dropping Fuser temperature?Originally Posted by bineeshgeorge
I replaced filim only, there is no fuser related errors.
Sent from my Redmi Note 7 using Tapatalk
Looks like poor fixing .
Make a P-print from service mode and after clear DC-CON on service mode then re install settings using the printout you made.
this is acommon occurance on IR3300
Check the steel leaf spring that presses against the steel registration roller.
When you think you have made a procedure idiot proof your company employs a better idiot.
Posting Permissions
Reply With Quote
Bookmarks