When you think you have made a procedure idiot proof your company employs a better idiot.
You say you swapped the toner motor in your first post, I would be looking at the dc controller, do these machine have a hopper driver pcb? I am not familiar with this model.
When you think you have made a procedure idiot proof your company employs a better idiot.
Yes i did the swap the Toner Motor but as both of these have the same issue so I'm planning to get New Toner motor and DC controller for one unit and see if that gets me out 'a trouble.
No it doesn't have hopper drive sub board, Toner motor is directly connected to DC controller.
Regard's
Thank you,
I already measured the Fuse 15 closer to J352, That reads okay.
Regard's
One more thing that i noticed is,
Why i have '' Check the Developer'' displayed next to Function > Install > Toner-S =''Check the Developer''?
Bookmarks