ImagePress C700 Fiery not working

[tomson25]

The fiery F200 for Image Press C700 is not working ,I tried to connect Machine without fiery to the network ,disabled fiery interface (image count No .0) & queue name to LP but it is not printing,In the printer bidirectional communication is on.The web page is loading & ping back is okey. Please see attached device config. page

[Hishamawada]

Hello ,

Check the rams for the fiery .

Hisham Awada

Sent from my SM-G610F using Tapatalk

[DFM914]

I think without the Fiery you still need a imagePress printer kit-B1 (PS,PCL,UFR) in order to print

[tomson25]

I think without the Fiery you still need a imagePress printer kit-B1 (PS,PCL,UFR) in order to print

Thanks for your support,The image server F200 showing check Video cable & power,I have checked this cable with another machine it is okey,what could be the problem?

[DFM914]

If you are seeing that message after putting it back on the C700 and switched interface switching back to 3, you likely have corrupt software on the Fiery. You can download the Fiery software to a thumbdrive from Canon esupport and re-image the Fiery very easily.

[tomson25]

I don't have access to Canon esupport,If anybody can share the system software of Image Server F200, it will be greatly appreciated.