Thanks: 
Likes: Hello ,
I have canon IR adv 6075.
And my problem is my devloper assembly striling sticks are falls and one spring also their in assembly .
Can any one tell me how to joint that two rods and spring in devloper assembly.
Thanks in advance.
Dislikes: 0
Hello ,
I have canon IR adv 6075.
And my problem is my devloper assembly striling sticks are falls and one spring also their in assembly .
Can any one tell me how to joint that two rods and spring in devloper assembly.
Thanks in advance.
They break. You have to vacuum out and replace. You’ll need to remove the gear assembly from the rear.
Sent from my iPhone using Tapatalk
Plz can you send me photo .Originally Posted by Brian8506
Can you give me the photo.
Order parts rebuild or just order new Dev assy
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
You shouldn’t need a photo of the drive side of the developing assembly. It’s pretty cut and dry. Maybe you need to enlist some help. Do you have the part to replace?
Sent from my iPhone using Tapatalk
Reply With Quote
Bookmarks