e0064 canon ir220

[OCS]

please my english is not very good, i have e0064 on my ir2200 i have checked de contunuity between te the transfert rooll the developping assembly the primary charge roll (5 connection total r= 9.8 k) the composite power supply is good. the last to do is to change the DC CONT PCB. is there anything to do befor?

[Brian8506]

You may just have to replace the drum unit.


Sent from my iPhone using Tapatalk

[NM0174]

please my english is not very good, i have e0064 on my ir2200 i have checked de contunuity between te the transfert rooll the developping assembly the primary charge roll (5 connection total r= 9.8 k) the composite power supply is good. the last to do is to change the DC CONT PCB. is there anything to do befor?

Change drum unit first, preferably get one from a working machine before you put a new one

Sent from my SM-N980F using Tapatalk

[OCS]

Change drum unit first, preferably get one from a working machine before you put a new one

Sent from my SM-N980F using Tapatalk

I'm at work i'll give you the Feed back as soon as i'll replace thé drum unit. Thanks to all of you