Canon C3530i

[Phil B.]

You were being very harsh and making smart remarks. I came on here for help and your talking about Genuine Canon parts. Also, you dont replace the transfer belt cleaning blade on this model. You replace the entire cleaning unit for about 30.00. Theres nothing to vaccum. I told you i replaced the blk drum and got the same result. That should tell you that the old drum was ok. Maybe the belt is badly worn and picking up some toner. In general the new cleaner unit comes primed. In most bigger models i prime the new blade using yellow toner. Reported me for saying asshole? Your pathetic Phil.

violation of forum rules:

1. We reserve the right to remove offensive posts without notice and also reserve the right to ban anyone who willfully violates the forum rules

9. Also while these rules cover most common situations, they cannot anticipate everything. Consequently we reserve the right to take any actions we deem appropriate to ensure these forums are not disrupted or abused in any way.

4. We do not allow posts or links to sites that are pornographic in nature or violate Copytechnet community standards. The Copytechnet staff shall be the sole arbitrator of what does and what does not violate community standards.

[Phil B.]

As you wish.

I will never try and help this guy again. we try to help by asking pertinent questions and I get cussed at... done with this sorry knowitall User.

[copytech,mike]

I will never try and help this guy again. we try to help by asking pertinent questions and I get cussed at... done with this sorry knowitall User.

You were the one acting like a know it all and making like i dont know anything. You were not nice to me. I quoted your name or your blackcat buddy by pure mistake and you guys were making smart remarks about it. You should re-evaluate yourself.

[Phil B.]

You were the one acting like a know it all and making like i dont know anything. You were not nice to me. I quoted your name or your blackcat buddy by pure mistake and you guys were making smart remarks about it. You should re-evaluate yourself.

awwww poor little baby....if you can't handle the heat stay the hell outta the kitchen.

how old are you? 5?

I standby all my remarks/suggestions ... I'm pretty sure you won't have to worry about me or BlackCat again....

[copytech,mike]

awwww poor little baby....if you can't handle the heat stay the hell outta the kitchen.

how old are you? 5?

I standby all my remarks/suggestions ... I'm pretty sure you won't have to worry about me or BlackCat again....

Ok Master.

[copytech,mike]

awwww poor little baby....if you can't handle the heat stay the hell outta the kitchen.

how old are you? 5?

I standby all my remarks/suggestions ... I'm pretty sure you won't have to worry about me or BlackCat again....

Im pretty sure i can get bye without you.

[copytech,mike]

you quoted blackcat but you used my name?

what are you with me on? that you don't know LEF or SEF? i would say SEF since you state there is the defect on the left hand side of the belt.

was the cleaner unit BRAND NEW? or rebuild? did you make sure the blade in the cleaner was properly powdered? if a used belt cleaner did you vaccume it out?

are you sure the rollers in the ITB are coming up properly and not dipping or not contaminated .

please tell us they are using genuine OEM supplies!

is the machine clean inside? laser lenses ?

is the mark on the old drum unit?

soo many things you haven't explained.

A laser lens has nothing to do with a black line.

[copier tech]

​Anyway back on topic!

Check the k developer unit, I suspect from your print samples you have a build on the dev roller this would explain when you get this band when printing yellow only.

An ITB cleaning issue would produce thick often brown lines not a think band.

[Canuck]

Imagerunner Advanced Colour C3530i? Switch black drum with yellow. Still there? Replace the black dev assembly., as "copier tech" suggested. A dirty laser path would lighten the image, not cause a semi-repetitive "spot-black" grey line. Itb cleaning failure would give a brownish waste toner coloured(process black/grey) line. A Test 10 would have been nice from service mode. As suggested, change the black dev

[blackcat4866]

From your sample:

C: 2%,
M: 3%
Y: 0%
K: 15%

Sounds like composite black to me.

ColorPic.jpg

=^..^=