Canon C3530 Black/Grey band.

[copytech,mike]

IMG_20210519_0001_NEW_NEW_NEW.jpg

I think if it was erase lamps that the edges of the band would be more defined. If the belt cleans off I wouldn’t think that is the problem but you may have to try it. I’ll check to see if there’s anything posted on the tech site. Tomorrow


Sent from my iPhone using Tapatalk

THANKS!

[copytech,mike]

I think if it was erase lamps that the edges of the band would be more defined. If the belt cleans off I wouldn’t think that is the problem but you may have to try it. I’ll check to see if there’s anything posted on the tech site. Tomorrow


Sent from my iPhone using Tapatalk

I can see a 2-3 inch toner residue band at the cleaning unit side of the belt after i make a copy and then pull the belt unit. I rotate it and it seems to clean off. Belt looks really lousy. Looks shot. Only 75k on meter. Mostly blk/wht.

[copytech,mike]

I can see a 2-3 inch toner residue band at the cleaning unit side of the belt after i make a copy and then pull the belt unit. I rotate it and it seems to clean off. Belt looks really lousy. Looks shot. Only 75k on meter. Mostly blk/wht.

Brian, do you think i have a bad blk dev unit? High spot on the brush maybe?

[tech345]

HI

This is developer cylinder. Just wipe toner with cloth and you will see black band. Polish it with dry cloth and it will be fine.
We have a lot of this problems.

try and see

best regards

[copytech,mike]

HI

This is developer cylinder. Just wipe toner with cloth and you will see black band. Polish it with dry cloth and it will be fine.
We have a lot of this problems.

try and see

best regards

Yes. That is exactly what it was. Where in the world does that sticky build up come from? Any idea? Thanks So much. Almost lost this customer! Thanks!

[copytech,mike]

Thanks so much to tech 345. He came in late but he's seen this on a bunch of this models.