Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: ir a c3320

  1. #1
    Technician
    Join Date
    Aug 2016
    Location
    jeddah
    Posts
    19
    Rep Power
    0

    ir a c3320

    dear all

    please look at pic 1 when machine has issue only for BK, but after replacing HVT fm1-c996-000

    became look at pic 2

    job done


    1 replaced both HVT for drum & develop biasing & hvt for transfer

    2 replaced dc controller

    3 power supply

    4 reset DC CON

    any best idea which i forgot


    thanks


    REGARDS
    Attached Images Attached Images

  2. #2
    Service Manager 10,000+ Posts
    ir a c3320

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,232
    Rep Power
    375

    Re: ir a c3320

    Quote Originally Posted by imran181070 View Post
    dear all

    please look at pic 1 when machine has issue only for BK, but after replacing HVT fm1-c996-000

    became look at pic 2

    job done


    1 replaced both HVT for drum & develop biasing & hvt for transfer

    2 replaced dc controller

    3 power supply

    4 reset DC CON

    any best idea which i forgot


    thanks


    REGARDS

    what about the transfer assmy?

  3. #3
    Technician
    Join Date
    Aug 2016
    Location
    jeddah
    Posts
    19
    Rep Power
    0

    Re: ir a c3320

    Quote Originally Posted by Phil B. View Post
    what about the transfer assmy?

    problem is sir we cant see any image or PATCHES on ITB during printing or

    initialising the machine ,how ever we replaced the transfer roller assy & ITB

  4. #4
    Copier Technician 1,000+ Posts
    ir a c3320

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,254
    Rep Power
    121

    Re: ir a c3320

    Quote Originally Posted by imran181070 View Post
    dear all

    please look at pic 1 when machine has issue only for BK, but after replacing HVT fm1-c996-000

    became look at pic 2

    job done


    1 replaced both HVT for drum & develop biasing & hvt for transfer

    2 replaced dc controller

    3 power supply

    4 reset DC CON

    any best idea which i forgot


    thanks


    REGARDS
    Its some thing you done when replacing hvt. What make you think it was that in the 1st place did you not 1st replace K drum and or K dev assy

  5. #5
    Service Manager 10,000+ Posts
    ir a c3320

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,232
    Rep Power
    375

    Re: ir a c3320

    Quote Originally Posted by mga View Post
    Its some thing you done when replacing hvt. What make you think it was that in the 1st place did you not 1st replace K drum and or K dev assy
    Come on Man didn't you know it's ALWAYS a board problem?

    some people rather use the 'shotgun' approach to trouble shooting a problem than LOGIC!

  6. #6
    Technician
    Join Date
    Aug 2016
    Location
    jeddah
    Posts
    19
    Rep Power
    0

    Re: ir a c3320

    Quote Originally Posted by mga View Post
    Its some thing you done when replacing hvt. What make you think it was that in the 1st place did you not 1st replace K drum and or K dev assy
    if u know this machine well ,then u should never say so , HVT so easy to replace it has only 2 connectors

    before replacing hvt we replaced drum & developer assy then we go frurther .

    in copytechnet their are over smart peoples , they dont know nothing but pretend to be experts ,instead helping annoying other not u sir , at least u asked

    logical question

  7. #7
    Copier Technician 1,000+ Posts
    ir a c3320

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,254
    Rep Power
    121

    Re: ir a c3320

    Quote Originally Posted by imran181070 View Post
    if u know this machine well ,then u should never say so , HVT so easy to replace it has only 2 connectors

    before replacing hvt we replaced drum & developer assy then we go frurther .

    in copytechnet their are over smart peoples , they dont know nothing but pretend to be experts ,instead helping annoying other not u sir , at least u asked

    logical question
    You did not say you replace drum and dev assy for the 1st picture you said you replaced when you had the 2nd fault put the machine back with original parts try and get pic 1 back if the pic2 happened after you replaced hvt you made problem worse go back over your work good luck

  8. #8
    Service Manager 10,000+ Posts
    ir a c3320

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,232
    Rep Power
    375

    Re: ir a c3320

    Quote Originally Posted by mga View Post
    You did not say you replace drum and dev assy for the 1st picture you said you replaced when you had the 2nd fault put the machine back with original parts try and get pic 1 back if the pic2 happened after you replaced hvt you made problem worse go back over your work good luck
    +1

    he didn't mention he replaced the transfer UNTIL after I mentioned it.

  9. #9
    Field Engineer 50+ Posts fchu5959's Avatar
    Join Date
    Jun 2010
    Location
    sainte clotilde 97490
    Posts
    75
    Rep Power
    23

    Re: ir a c3320

    Quote Originally Posted by imran181070 View Post
    dear all

    please look at pic 1 when machine has issue only for BK, but after replacing HVT fm1-c996-000

    became look at pic 2

    job done


    1 replaced both HVT for drum & develop biasing & hvt for transfer

    2 replaced dc controller

    3 power supply

    4 reset DC CON

    any best idea which i forgot


    thanks


    REGARDS
    Indeed,this machine seems to be very simple but it can be very tricky to troubleshoot;As a fact,you should proceed logically and methodically.
    You should try to get pic1 back and then proceed further.
    Last edited by fchu5959; 2 Weeks Ago at 08:07 PM.

  10. #10
    Technician
    Join Date
    Aug 2016
    Location
    jeddah
    Posts
    19
    Rep Power
    0

    Re: ir a c3320

    Quote Originally Posted by phil b. View Post
    +1

    he didn't mention he replaced the transfer until after i mentioned it.
    sorry to say

    better not to write on any thread

    u r not help ful ,waisting ur time

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here