Hi everyone
i need help in Canon ir 3300 printing Problem. Please Look the attachment & Help in this regards.
Action Taken:- Transfer Roller Change
HVT Unit Change
Leaser Unit Change
Drum/D.P. Unit Change
Still this problem in not Solving
Hi everyone
i need help in Canon ir 3300 printing Problem. Please Look the attachment & Help in this regards.
Action Taken:- Transfer Roller Change
HVT Unit Change
Leaser Unit Change
Drum/D.P. Unit Change
Still this problem in not Solving
Assuming the drum is good and there's not alot of moisture in the paper, I would vacuum out the dv unit, dry wipe the cylinder and put in fresh toner.
Hi
Thanks for your reply. i changed whole Drum Unit & Developer Unit from another machine which is working fine. & Drum and Developer unit is also working fine in another machine
Regards
Have you tried 2 sided copies or fresh paper? Wondering if 1 side is good and other side bad. Looks like dv or paper problem. I’ve had that here in the Northeast at high humidity times of the year. Doesn’t look like an electrical problem.
Sent from my iPhone using Tapatalk
Hi
I Have Tried everything Fresh Paper, Two Sided still no success at all. the problem arise after replacement of fixing motor unit
Regards
Maybe you should go back through the procedure for replacing the fixing motor unit. There may be a barrister in that area for the transfer that isn’t connected.
Does anyone need a like new feed assembly for this model?
Stop the print half way and see if image is good on drum, if good...you have a transfer problem, if bad...you have a developing problem
IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications
Thanks all for your valuable Suggestion. Some Biasing make this problem
Regards
Bookmarks