Hi,
I have Canon Ir Adv 8205 but i need to supply toner to devloping assembly manually using service mode.
I checked Buffer unit is working fine
Devloping assembly toner sensor is working
What can i do ?
Hi,
I have Canon Ir Adv 8205 but i need to supply toner to devloping assembly manually using service mode.
I checked Buffer unit is working fine
Devloping assembly toner sensor is working
What can i do ?
Hello , the stirring rod inside the developing unit is broken, causing the machine to think that the developer unit is full .
You need to change it. you need to check it at the gears , location.
If you need anything else tell me.
Sent from my SM-G610F using Tapatalk
Did you open up the developing assembly and see if there’s toner in there? If it’s all piled up towards the back then Hishamawada is right about the stirring rod being broken. Seems to be a common problem. And yes one end of the stirring rod is connected to a spring.You have to take the drive area of the developing it off to get to the other end.
Sent from my iPhone using Tapatalk
Yesterday I opened developing assembly
3 rod are broken and one spring is there
How to connect that spring
Plz tell me about that spring
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Bookmarks