My C5235 needs cleaning, and I will do a thorough cleaning when i get the time. Before that happens, is there an easy way to get rid of these marks?
It only happens when I print double sided prints.
Tia,
/andreas
My C5235 needs cleaning, and I will do a thorough cleaning when i get the time. Before that happens, is there an easy way to get rid of these marks?
It only happens when I print double sided prints.
Tia,
/andreas
Drum are sucks
They are drum unit issues.
You can try swapping the drums with another color and check if the lines appear with different colors .
Sent from my SM-G610F using Tapatalk
You are probably right guys. I have ordered 4 new drum rolls and cleaner blades. In the meanwhile, I'll pick them out and see if a little cleaning can help. If I'm not mistaken I did that with a printer 15 years ago and it helped, a little at least.
Thanks for your answers!
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
The compatible parts are always a waste of money , there lifetime is much less the genuine.
If you want the rebuild it , you should also change the charging roller. Bad rollers will damage the drum soon and cause bad quality printouts
Sent from my SM-G610F using Tapatalk
Thanks for all your input.
Unfortunately I have already paid for it and they should be on their way... 😝
These: 4 pcs. OPC DRUM ONLY IR C5240 C5235 C5035 C5030 C5045 C5051 GPR-31 GPR-30 GPR30 13803115659 | eBay
It's the same price for four drum rolls as one complete drum set, at least from here in Sweden. Any better choices?
Talking about spare parts; I have good experience from Katun, any opinions?
Since you have already ordered them , its fine . Hope they will last long enough .
Genuine drums last around 120K sometimes more . For Compatible if your lucky they will last 50k . Not stating the quality drop in your prints .
It all depends on your type of work .
As i mentioned before , if you can get charging rollers would be much better.
Best of luck
Sent from my SM-G610F using Tapatalk
Bookmarks