Hi,
I suggest you clean the photo sensors located on the ITB frame;at the same time have a look at the drums state and the ITB cleaning blade.Replace if necessary.
I hope these tips will help you resolve the issue.
Take care.
Hi,
I suggest you clean the photo sensors located on the ITB frame;at the same time have a look at the drums state and the ITB cleaning blade.Replace if necessary.
I hope these tips will help you resolve the issue.
Take care.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Hello,
I have found this:
2021-09-21 18_24_25-color_ir_c3480.pdf - Adobe Acrobat Reader DC.jpg
In the text they mean i can do :
1) Perform the service mode > service chart print > service chart print 8.
But if I print in Service mode PG type 8 the image dose not look like in pic 2.
2021-09-21 18_25_00-color_ir_c3480.pdf - Adobe Acrobat Reader DC.jpg
Dose someone know how i can print this out ( with that chart i can easy ajust the offset of the colors)
On the next page is a calculation to get the rigth offset values.
The manual is there Canon iR C2880 series Manuals | ManualsLib
and it is on page 504
Thanks
Hello,
Can someone send me the P-Print form an IRC2880 ?
I have lost my last pintout and now I can 't ste the DENS values.
Tanks
Try PG-TYPE 6
I have serviced lots of these machines for more than 10 years and i have never had to use offset values to cater for color displacement.
Just make sure the two sensors on the iTB are clean .otherwise the drums,itb cleaning blade and/or the belt itself could be defective.
Hello,
I have try the PG Testprint 6 and that is not the chart like in the Manual, it is an grid with 1cm spaning (wehre you can see the displacement of the colors.
Bookmarks