CANON C3330i Firmware

**mkarip** · 09-19-2021

I need the firmware for an C3330i.
Plus instruction which data is necessaray on USB Flash Drive

Error on bootup: E602-0101

Thank you very much.
info@compax.ch

**Phil B.** · 09-19-2021

Originally Posted by mkarip

I need the firmware for an C3330i.
Plus instruction which data is necessaray on USB Flash Drive

Error on bootup: E602-0101

Thank you very much.
info@compax.ch

PM Copier Tech

Sent from my SM-G960U using Tapatalk

**mkarip** · 09-20-2021

Hello Phil
I cannot send PM messages.
Can you contact me?

**mkarip** · 09-20-2021

That would be the easiest way, but the hard drive is defective, the device cannot complete boot.
No acces to service mode.

**mkarip** · 09-20-2021

I have replaced the hard drive, now I have to load system software via USB Device.
Need Firmware and instruction..Button 2+8 then Download..right?

**mkarip** · 09-20-2021

I can't select a firmware because I don't have a working USB Flash Drive.
Get to the screen below, no further.

IMG_5120.jpg

**mga** · 09-20-2021

Originally Posted by mkarip

I have replaced the hard drive, now I have to load system software via USB Device.
Need Firmware and instruction..Button 2+8 then Download..right?

Was it the correct hdd it has to be supplied by Canon for that series. If you taken from an other machine of the same model you may have to reload firmware on the newer machine Canon are stopping just swapping hdd you will get a 602 error also you need sst to put firmware on a USB look for CTN user copier tech he's website details are on his profile

**copier tech** · 09-20-2021

Happy to help with the firmware.

As others have said you can't just fit any HDD to a Canon you have to purchase an identical drive to your failed one.

**copytech,mike** · 09-20-2021

Originally Posted by copier tech

Happy to help with the firmware.

As others have said you can't just fit any HDD to a Canon you have to purchase an identical drive to your failed one.

You get the firmware VIA Email and copy it to a USB. You dont need any SST for jack. You have to find a Canon dealer who is willing to give you the firmware. Has to be copied on flash drive so that the firmware is at top of the list. Then yes, its power up 28
You should find a used HDD from a junked machine and then you wont need the firmware. Without a buddy at a Canon dealer your out of luck. Pay Canon Buis solutions 200.00 to come out with the firware is another option. E602 means that your HDD is dead.