I need the firmware for an C3330i.
Plus instruction which data is necessaray on USB Flash Drive
Error on bootup: E602-0101
Thank you very much.
info@compax.ch
I need the firmware for an C3330i.
Plus instruction which data is necessaray on USB Flash Drive
Error on bootup: E602-0101
Thank you very much.
info@compax.ch
Hello Phil
I cannot send PM messages.
Can you contact me?
That would be the easiest way, but the hard drive is defective, the device cannot complete boot.
No acces to service mode.
I have replaced the hard drive, now I have to load system software via USB Device.
Need Firmware and instruction..Button 2+8 then Download..right?
I can't select a firmware because I don't have a working USB Flash Drive.
Get to the screen below, no further.
IMG_5120.jpg
Was it the correct hdd it has to be supplied by Canon for that series. If you taken from an other machine of the same model you may have to reload firmware on the newer machine Canon are stopping just swapping hdd you will get a 602 error also you need sst to put firmware on a USB look for CTN user copier tech he's website details are on his profile
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Happy to help with the firmware.
As others have said you can't just fit any HDD to a Canon you have to purchase an identical drive to your failed one.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
You get the firmware VIA Email and copy it to a USB. You dont need any SST for jack. You have to find a Canon dealer who is willing to give you the firmware. Has to be copied on flash drive so that the firmware is at top of the list. Then yes, its power up 28
You should find a used HDD from a junked machine and then you wont need the firmware. Without a buddy at a Canon dealer your out of luck. Pay Canon Buis solutions 200.00 to come out with the firware is another option. E602 means that your HDD is dead.
Thank you for reply.
Is it possible to take HDD from a C355i?
Bookmarks