Canon ir3225 not warming up only green light

[universaltvm]

Ir3225 not warming up only green light glows. I reseated memory. Same issue. I have noticed a red led blinks in main control pcb. Plz help....

Sent from my POCO M2 Pro using Tapatalk

[zoraldinho]

Symptom of dead main controller.

[Brian8506]

Ditto. Just had the same problem a month ago


Sent from my iPad using Tapatalk

[kstan268]

Ditto. Just had the same problem a month ago


Sent from my iPad using Tapatalk

You can try short circuit the two point at beside the back up battery in main com

[universaltvm]

You can try short circuit the two point at beside the back up battery in main com

I had done

Sent from my POCO M2 Pro using Tapatalk

[kstan268]

I had done

Sent from my POCO M2 Pro using Tapatalk

Then it most chance is main con problem..but before you replace main con try replace control panel sometime it also couse by control panel also

[universaltvm]

Then it most chance is main con problem..but before you replace main con try replace control panel sometime it also couse by control panel also

Ok. In Main controller a red light is flickering. No other lights like power gud is not glowing

Sent from my POCO M2 Pro using Tapatalk

[kstan268]

Ok. In Main controller a red light is flickering. No other lights like power gud is not glowing

Sent from my POCO M2 Pro using Tapatalk

Then confirm is main con faulty

[universaltvm]

Then confirm is main con faulty

Ok


Sent from my POCO M2 Pro using Tapatalk

[universaltvm]

Ok


Sent from my POCO M2 Pro using Tapatalk

Replaced the power supply working fine nw

Sent from my POCO M2 Pro using Tapatalk