Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Junior Member
    Join Date
    Mar 2022
    Location
    warsaw
    Posts
    3
    Rep Power
    0

    canon 2016 paper jam/change paper size

    hello, i have a problem with Canon ir 2016, paper jam, and appear error change paper size, pickup roller changed, from manual feeder all ok, so sensors may be ok too
    single pages go normally
    thanks all

    zdjecie4.jpgzdjecie3.jpgzdjecie1.jpgzdjecie2.jpg

  2. #2
    Senior Tech 250+ Posts
    canon 2016 paper jam/change paper size

    MunsterTech's Avatar
    Join Date
    Sep 2014
    Location
    limerick
    Posts
    373
    Rep Power
    24

    Re: canon 2016 paper jam/change paper size

    this rings a bell, but a long time since ive seen one, but the registration sensor wears down slightly, you can see it in your pic 2 behind the panel, replace it and it should be good to go again

  3. #3
    Senior Tech 250+ Posts
    canon 2016 paper jam/change paper size

    techandtrader's Avatar
    Join Date
    Jun 2016
    Location
    Oklahoma City OK
    Posts
    311
    Rep Power
    22

    Re: canon 2016 paper jam/change paper size

    The 2016 and 2020 both had flaws in the engineering of the feed assembly's. Both assembly's saw several revisions of updates as in maybe revision -060! To top it off, to cure the problem, you needed to replace BOTH updated assembly's at the same time. Or else timing problem and jam problem would result. Its dead Jim! Say goodbye.

  4. #4
    Junior Member
    Join Date
    Mar 2022
    Location
    warsaw
    Posts
    3
    Rep Power
    0

    Re: canon 2016 paper jam/change paper size

    Quote Originally Posted by techandtrader View Post
    The 2016 and 2020 both had flaws in the engineering of the feed assembly's. Both assembly's saw several revisions of updates as in maybe revision -060! To top it off, to cure the problem, you needed to replace BOTH updated assembly's at the same time. Or else timing problem and jam problem would result. Its dead Jim! Say goodbye.
    that you mean this copier is trash? its not profitable to repair?

  5. #5
    Master Of The Obvious 10,000+ Posts
    canon 2016 paper jam/change paper size

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: canon 2016 paper jam/change paper size

    At 16 years old, you probably are not going to be able to find much in the way of replacement parts. Your best chance, I think, is to start collecting Canon imageRunner 2016 corpses, in the hopes of collecting enough parts to fix something. Otherwise, yes, it's time to let it die. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Junior Member
    Join Date
    Mar 2022
    Location
    warsaw
    Posts
    3
    Rep Power
    0

    Re: canon 2016 paper jam/change paper size

    Quote Originally Posted by blackcat4866 View Post
    At 16 years old, you probably are not going to be able to find much in the way of replacement parts. Your best chance, I think, is to start collecting Canon imageRunner 2016 corpses, in the hopes of collecting enough parts to fix something. Otherwise, yes, it's time to let it die. =^..^=

    that's right, too much problems with that special one copier which have just 50.000 copies
    usually all that copier need is new drum unit or toner, first case like that
    thanks for answers,
    in free time ill try to do sth with that

  7. #7
    Junior Member kasper's Avatar
    Join Date
    Feb 2021
    Location
    Warsaw
    Posts
    3
    Rep Power
    0

    Re: canon 2016 paper jam/change paper size

    Canon ir 2016, paper jam, and appear error change paper size

    - You need to replace registration roller (its called roller vertical path) overtime it become more plastic and slick than rubber
    - When You replacing registration roller, its worth to replace registration sensor black plastic flag just above rollers (the flag rubs off the paper) <- like @MunsterTech said in his post

  8. #8
    Service Manager 1,000+ Posts
    canon 2016 paper jam/change paper size

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: canon 2016 paper jam/change paper size

    In the rear part of the machine there are also the magnets that activate the rotation of the rollers axis remain glued thanks to the deteriorated shock absorber bearing, replace it with sponge or rubber of the same thickness.

  9. #9
    Junior Member
    Join Date
    Dec 2013
    Posts
    4
    Rep Power
    0

    Re: canon 2016 paper jam/change paper size

    You need replace registration clutch.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here