Thanks:
0
Likes:
0
Dislikes:
0
-
IPF4000 clear an error code EC22-4001 after replacing the Head Management Sensor?
I replaced the Head Management Sensor after getting an error code EC22-4001, I went to service mode and the machine asked me if I replaced parts, did the Nozzle adjustment and cleared the parts counter, works fine on service mode but after rebooting it came out with the same error code. Any suggestions?
-
Re: IPF4000 clear an error code EC22-4001 after replacing the Head Management Sensor?
Technician reseated all connectors and cut wire ties. All is good!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks