Error code on c7565

[Copybox]

Have an error code e260 0440 is there a way to fix or clear this??

Thanks
J

[ReproKev]

From the service manual:

E260-0440-05 Power supply error
Detection Description The 24 V supply to the Developing Stirring Motor was not detected. (Blowout of FU6 and 7 on the
Developing Assembly Control PCB)
Remedy [Related parts] R1.00
- Harnesses connecting from the Developing Assembly Control PCB (UN96/J1303 and J1304) to
the Drawer Unit (J8031D) to the Developing Stirring Motor (Y, M, C and Bk) (M26/J7158, M28/
J7156, M27/J7157 and M29/J7152)
- Developing Stirring Motor (Y, M, C and Bk) (M26, M28, M27 and M29)
- Developing Assembly Control PCB (UN96)
[Remedy] Check/replace the related harness/cable, connector and parts.