Dislikes: 0
hi,
have a new tech just started with us, I used to have a sheet with image fault measurements on for re-occurring marks and the distance between them in mm for drums, transfer roller, charge rollers, itbs etc
does anyone have the sheet so i can print it off for him? Checked previous posts but cant find it.
regards,
the service manual report
rep .jpg
"Knowledge is a source, but unfortunately ignorance is a sea."
This good information ... especially if we knew what model it referred to. =^..^=Originally Posted by giogi
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
In every service manual there is this table
"Knowledge is a source, but unfortunately ignorance is a sea."
A demanding customer.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
In what section of the service manual is this table?
on the DX models in service manual chapter 7 Troubleshooting Items
"Knowledge is a source, but unfortunately ignorance is a sea."
Thanks: 
Likes: 
Reply With Quote
Bookmarks