Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 13
Code E000-0107 Imagepress C8000VP
Good night. Complete primary fusion unit replaced. And I still get the same error. Someone who can give me a help.
Enviado desde mi Infinix X693 mediante Tapatalk
-
Junior Member
- Rep Power
- 0
Re: Code E000-0107 Imagepress C8000VP
E000-0107-05 Fixing temperature rising detection error
Detection Description The temperature of the Primary Fixing Pressure Belt Heater did not reach 17 deg C within 50 sec
at warm-up rotation.
After performing the remedy work, go through the following to clear the error: COPIER>
FUNCTION> CLEAR> ERR.
Remedy [Related parts] R1.00
- Harnesses from the Primary Fixing Heater Driver PCB to the Primary Fixing Pressure Belt Heater
1. Primary Fixing Heater Driver PCB (UN306/J4311P) to Relay Connector (12P) (Unit of
replacement: CABLE, FIRST FIXING DRAWER)
2. Relay Connector (12P) to Drawer Unit (J7026D) (Unit of replacement: CABLE, DRAWER, 1)
3. Drawer Unit (J7026L) to Relay Connector (3P) (Unit of replacement: CABLE, DRAWER, 1)
4. Relay Connector (3P) to Primary Fixing Pressure Belt Heater (H305/J7628 and J7629) (Unit of
replacement: CABLE, HEATER)
- Harnesses from the Primary Fixing Outer Driver PCB to the Primary Fixing Pressure Belt Main
Thermistor
1. Primary Fixing Outer Driver PCB (UN304/J4192P) to Drawer Unit (J7026D) (Unit of replacement:
CABLE, DRAWER, 1)
2. Drawer Unit (J7026L) to Relay Connector (7P) (Unit of replacement: CABLE, DRAWER, 1)
3. Relay Connector (7P) to Primary Fixing Pressure Belt Main Thermistor (THM300M/J5402) (Unit
of replacement: CABLE, THERMISTOR, RIGHT)
- Harness between the Fixing Duplex Feed Driver PCB (UN311/J4081 and J4082) and the Primary
Fixing Outer Driver PCB (UN304/J4181P and J4182P) (Unit of replacement: CABLE, FIXING
DUPLEXING, LEFT)
- Harness between the DC Controller PCB 1-2 (UN124/J1070, J1071 and J1072) and the Fixing
Duplex Feed Driver PCB (UN311/J4071WH, J4072WH and J4070) (Unit of replacement: CABLE,
FIXING DUPLEXING DRAWER)
- Primary Fixing Pressure Belt Main Thermistor (THM300M)
- Primary Fixing Pressure Belt Heater (H305)
- Primary Fixing Heater Driver PCB (UN306) (Unit of replacement: FIXING HEATER DRIVER PCB
Assembly)
- Primary Fixing Outer Driver PCB (UN304) (Unit of replacement: FIXING OUTER DRIVER PCB
Assembly)
- Fixing Duplex Feed Driver PCB (UN311) (Unit of replacement: FIXING DUPLEX FEED PCB
Assembly)
- DC Controller PCB 1-2 (UN124) (Unit of replacement: DC CONTROLLER PCB 1-2 ASSEMBLY)
[Remedy] Check/replace the related harness/cable, connector and parts.
After performing the remedy work, go through the following to clear the error: COPIER>
FUNCTION> CLEAR> ERR.
image001.jpg
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks