C5550i Controller Swap

[Elmo]

Hi all
Looking for advise on canon iradv c5550i i have a machine with a faulty controller (wont boot just flashing standby light checked voltages and its the controller faulty)
i have a used working controller removed from a scrap machine
can anyone help me with the correct procedure to install a used board ie which do i need swap over the Flash PCB,TPM PCB, Memory PCB and Bypass PCB ?
and is there anything else i need to do
Thanks

[copier tech]

Hi all
Looking for advise on canon iradv c5550i i have a machine with a faulty controller (wont boot just flashing standby light checked voltages and its the controller faulty)
i have a used working controller removed from a scrap machine
can anyone help me with the correct procedure to install a used board ie which do i need swap over the Flash PCB,TPM PCB, Memory PCB and Bypass PCB ?
and is there anything else i need to do
Thanks

Yes you can swap the controller from one machine to another but you MUST not swap over any other boards, flash, tpm etc etc so take them off you faulty controller & fit to the doner board.