Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Technician
    Join Date
    May 2012
    Location
    lima
    Posts
    32
    Rep Power
    24

    Canon c5235 Registration

    Hello Again

    Today I received a machine that has a bad registration, the color are not synchronized.

    I have tried changing
    - main controller 1
    - laser units (both)
    - main controller 2
    - ITB

    SL1 is tested and patch has been cleaned (not changed)

    What else can it be?

    Please your help will be appreciated.

    Thank you In advance


    Sent from my iPhone using Tapatalk

  2. #2
    Technician
    Join Date
    Jun 2019
    Location
    muscat
    Posts
    18
    Rep Power
    0

    Re: Canon c5235 Registration

    Try to re-entry the values in the birth certificate found in the inside of the front door and do gradation adjustment

  3. #3
    Technician
    Join Date
    May 2012
    Location
    lima
    Posts
    32
    Rep Power
    24

    Re: Canon c5235 Registration

    Quote Originally Posted by Asaadahmed003 View Post
    Try to re-entry the values in the birth certificate found in the inside of the front door and do gradation adjustment
    That is also a problem because the machines have another door and it didnít come with the original one. I have tried to put the values from the door that came with it but no good results.

    I must say that grid test comes with different separations of color. To make that more clear, in the upper part of the page the colors have a 5 mm separation but in the end of the page the colors match. What could it be?


    Sent from my iPhone using Tapatalk

  4. #4
    Senior Tech 100+ Posts doktor's Avatar
    Join Date
    Jan 2010
    Location
    Slovenia
    Posts
    195
    Rep Power
    30

    Re: Canon c5235 Registration

    DC -CON clear ?

  5. #5
    Technician
    Join Date
    May 2012
    Location
    lima
    Posts
    32
    Rep Power
    24

    Re: Canon c5235 Registration

    Quote Originally Posted by doktor View Post
    DC -CON clear ?
    Havenít tried it exactly, but I have updated the firmware and also I have changed DC Controller.


    Sent from my iPhone using Tapatalk

  6. #6
    Technical/IT Support 500+ Posts Venom's Avatar
    Join Date
    Nov 2009
    Location
    Ontario
    Posts
    762
    Rep Power
    40

    Re: Canon c5235 Registration

    verify the drum units are seated properly, front side could not be in far enough and that could cause that
    IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

  7. #7
    Technician
    Join Date
    Jun 2019
    Location
    muscat
    Posts
    18
    Rep Power
    0

    Re: Canon c5235 Registration

    [QUOTE=jvga2010;2535442]

    I must say that grid test comes with different separations of color. To make that more clear, in the upper part of the page the colors have a 5 mm separation but in the end of the page the colors match. What could it be?


    That's weird if it match in one side it should match on the other... Can you upload a scan from the PG10 test page? And are you printing SEF or LEF?

  8. #8
    Engineer senior 100+ Posts giogi's Avatar
    Join Date
    Jan 2016
    Location
    Italy
    Posts
    180
    Rep Power
    25

    Re: Canon c5235 Registration

    Try launching these service modes

    Lerv2 COPIER > FUNCTION > LASER > LD-ADJ-Y M C K

    Lev1 COPIER > FUNCTION > MISC-P > AT-IMG-X
    "Knowledge is a source, but unfortunately ignorance is a sea."

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Aug 2014
    Location
    lima
    Posts
    401
    Rep Power
    0

    Re: Canon c5235 Registration

    Hello, if you can send a photo of test 6 and test 10.
    check the drums if it is original or compatible, if the drum is original, check the transfer unit, perform its maintenance, after performing the maintenance on the itb, perform init itb and atx-img in service mode

  10. #10
    Senior Tech 250+ Posts
    Join Date
    Aug 2014
    Location
    lima
    Posts
    401
    Rep Power
    0

    Re: Canon c5235 Registration

    If making the adjustments in the service mode and the failure continues, enter the service mode again and in adjust-regist, set everything to zero and click ok, turn the machine off and on. then to try....

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here