c3525i II printing shifted page

[anas.agha]

hi
any help pls.

i have canon c3525i II when printing any thing its shifted to right 4mm, and if make a copy its shifted more

[ADV COPIER]

Re: c3525i II printing shifted page

check regist roll

This will cause the photocopying process to become unbalanced and the paper will move more easily. The characteristics of a damaged register can be seen from its slippery and cracked condition. The solution is to replace the register unit so that the photocopier can function normally again.

[zoraldinho]

Re: c3525i II printing shifted page

Is the paper straight but the image shifted or does it not pull the paper straight?
Is the problem from both cassettes?
Is the problem also from the bypass?
Post a pic please.

[anas.agha]

Re: c3525i II printing shifted page

Is the paper straight but the image shifted or does it not pull the paper straight?
Is the problem from both cassettes?
Is the problem also from the bypass?
Post a pic please.

no the whole picture has move to the right for about 4 mm, but its still straight.
I have attached a picture showing the same document printed on this copy machine and another printer for comparison.
and if I copy the resulting paper it will move further to the right.

[zoraldinho]

Re: c3525i II printing shifted page

Service mode:

Copier/Adjust/Feed adjust/Regist/ Set about 30 less.


Good to know:


Leading edge

1. COPIER > ADJUST > FEED-ADJ > REGIST : 1/1 speed, front side
2. COPIER > ADJUST > FEED-ADJ > REG-DUP1 : 1/1 speed, back side
3. COPIER > ADJUST > FEED-ADJ > REG-THCK : 1/2 speed, front side
4. COPIER > ADJUST > FEED-ADJ > REG-DUP2 : 1/2 speed, back side Leading edge margin is increased or decreased 0.1mm by 1 setting value. 2.
5. COPIER > ADJUST > FEED-ADJ > ADJ-C1/C2/C3/C4/MF : front side
6. COPIER > ADJUST > FEED-ADJ > ADJ-C1RE/C2RE/C3RE/C4RE/MFRE : back side Left edge margin is increased or decreased 0.1mm by 1 setting value.

Left edge

COPIER > ADJUST > FEED-ADJ > ADJ-C1/C2/C3/C4/MF : front side
COPIER > ADJUST > FEED-ADJ > ADJ-C1RE/C2RE/C3RE/C4RE/MFRE : back sideLeft edge margin is increased or decreased 0.1mm by 1 setting value

[anas.agha]

Re: c3525i II printing shifted page

Service mode:

Copier/Adjust/Feed adjust/Regist/ Set about 30 less.


Good to know:


Leading edge

1. COPIER > ADJUST > FEED-ADJ > REGIST : 1/1 speed, front side
2. COPIER > ADJUST > FEED-ADJ > REG-DUP1 : 1/1 speed, back side
3. COPIER > ADJUST > FEED-ADJ > REG-THCK : 1/2 speed, front side
4. COPIER > ADJUST > FEED-ADJ > REG-DUP2 : 1/2 speed, back side Leading edge margin is increased or decreased 0.1mm by 1 setting value. 2.
5. COPIER > ADJUST > FEED-ADJ > ADJ-C1/C2/C3/C4/MF : front side
6. COPIER > ADJUST > FEED-ADJ > ADJ-C1RE/C2RE/C3RE/C4RE/MFRE : back side Left edge margin is increased or decreased 0.1mm by 1 setting value.

Left edge

COPIER > ADJUST > FEED-ADJ > ADJ-C1/C2/C3/C4/MF : front side
COPIER > ADJUST > FEED-ADJ > ADJ-C1RE/C2RE/C3RE/C4RE/MFRE : back sideLeft edge margin is increased or decreased 0.1mm by 1 setting value

Thank you very much
Now the print is fixed, but the copy process is still shifted a little to the right
is there a way to change the edge margin for the copy process?
I attached a picture showing the problem with copying
this happens with both the feeder and the glass scanner

[zoraldinho]

Re: c3525i II printing shifted page

Thank you very much
Now the print is fixed, but the copy process is still shifted a little to the right
is there a way to change the edge margin for the copy process?
I attached a picture showing the problem with copying
this happens with both the feeder and the glass scanner

Enter the value inside front reader cover.

COPIER > ADJUST > CCD > W-PLT-X
COPIER > ADJUST > CCD > W-PLT-Y
COPIER > ADJUST > CCD > W-PLT-Z

2. Adjust the shading position.

COPIER > FUNCTION > INSTALL > RDSHDPOS

3. Set the target value of B&W shading.

COPIER > FUNCTION > CCD > BW-TGT

[Canuck]

Re: c3525i II printing shifted page

If you look closely, it's enlarging the image,maybe near the trail edge. It's not a registration/feed adj issue. Print a grid from the print engine(test page)