Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30
  1. #21
    Technician
    Join Date
    Nov 2009
    Posts
    43
    Rep Power
    25
    As for the driver go to this link to and down load the second item. After you open the .exe file you will find an uninstall utility. This should remove all the Canon related driver info. Then you can do the install via the setup and choose your driver.
    I tried that link and downloaded it the second item in the list from the top which is this one :

    ( PCL5e-c_6_v8.70_v6.70_Setup.exe ) but I could not find uninstall utility ,,,,,Am I doing the right thing as you suggested ?

    Thanks

  2. #22
    Service Manager 250+ Posts
    Join Date
    Sep 2008
    Posts
    384
    Rep Power
    31
    When you run the exe file an option for type of installation to do should be uninstall.

  3. #23
    Technician
    Join Date
    Nov 2009
    Posts
    43
    Rep Power
    25
    When you run the exe file an option for type of installation to do should be uninstall.
    This is what I have got when I run the exe file do I need to proceed further with the Wizard ? Is this the right exe am I using ?

    Imageshack - setupwizardforcanonprin



    As you may notice in the attached snapshot there is no option for " Uninstall "

    Thanks

  4. #24
    Technician
    Join Date
    Nov 2009
    Posts
    43
    Rep Power
    25
    Dear All

    I could not get hold of a Canon authorized dealer as you know theses days are Christmas days.

    Meanwhile what I did I uninstalled the driver for the printer as suggested
    It is the best uninstall utility I have found. It removes registry entries
    Then I installed the new driver
    As for the driver go to this link to and down load the second item.
    Then I pushed the new driver to all workstations

    I have done that remotely via VPN (I would assume that should not be different from being on a client site physically ,,,,should it ?)

    After updating the driver the client called me and told me that an error light flashing on the printer, panel screen displayed job id it was 8920 (I was able to see that as well from the job status web page of the printer).

    While I was with him at phone, I tested the ping display web interface of the printer http://192.1680.126

    They were working.

    I asked him to switch off the printer wait one minute and then switch it on again still same error light is flashing

    Do u think updating the printer driver caused this problem ?

    Thanks
    Last edited by zillah; 12-26-2009 at 01:04 AM.

  5. #25
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,591
    Rep Power
    56
    You've said earlier that the issue was sporadic yes?
    That the users could print one minute and not the next?
    Rebooting the MFD would have been coincidental IMO...just one of those things.
    As I stated earlier...in my experience with iR3300's and users inability to print the firmware upgrade has always fixed it.
    Make sure that you follow through with the firmware upgrade...regardless of whether it's printing now or not.

  6. #26
    Technician
    Join Date
    Nov 2009
    Posts
    43
    Rep Power
    25
    As I stated earlier...in my experience with iR3300's and users inability to print the firmware upgrade has always fixed it.
    For sure that will be taken in consideration.

  7. #27
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,587
    Rep Power
    109
    Quote Originally Posted by zillah View Post
    This is what I have got when I run the exe file do I need to proceed further with the Wizard ? Is this the right exe am I using ?

    Imageshack - setupwizardforcanonprin



    As you may notice in the attached snapshot there is no option for " Uninstall "

    Thanks
    Once a driver is installed using the "Setup" utility, it will create a program group on your start menu to be able to uninstall the driver.

    If you install PCL, PS, and UFR drivers, you will get an option to uninstall each.

    IMHO, though, I feel that the Kyocera Mita uninstall utility is still the best way to completely remove a driver of nearly, if not any brand of printer.
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

  8. #28
    Technician
    Join Date
    Nov 2009
    Posts
    43
    Rep Power
    25
    For sure that will be taken in consideration.
    Today I called the technician and he told me that it would cost $93 for a technician to be onsite and then an extra cost for a troubleshooting afterthat.
    And when I spoke to the client he told me ,let me think and he will let me know.

    Meanwhile what I did,I checked the firmware version

    One thing that could be good is if you could check what version of firmware is installed under Copier > Display > Version in Service Mode. You could check in particular MN-CONT, BOOT-ROM and PS/PCL.
    MN-CONT 45.01

    BOOT-ROM 22.44N

    PS/PCL 30.06

    Are those most updated one ?

    Thanks

  9. #29
    East Coast Imaging 2,500+ Posts
    Network printer Canon IR3300 stops working frequently

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,401
    Rep Power
    66
    Quote Originally Posted by zillah View Post
    Today I called the technician and he told me that it would cost $93 for a technician to be onsite and then an extra cost for a troubleshooting afterthat.
    And when I spoke to the client he told me ,let me think and he will let me know.

    Meanwhile what I did,I checked the firmware version



    MN-CONT 45.01

    BOOT-ROM 22.44N

    PS/PCL 30.06

    Are those most updated one ?

    Thanks
    That's the latest.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  10. #30
    Technician
    Join Date
    Nov 2009
    Posts
    43
    Rep Power
    25
    That's the latest.
    I see

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here