are u trained tech ???
HDD's out of the box "Do Not Contain Printer Firmware"
for e602, u need Printers Firmware > Canon HDD for your model > Canon SST ( Service Support Tool )
Install SST
Download Firmware
Open SST> Register Printer Firmware
Format the HDD (with HDformat file_shown in printer firmware menu) using selection of single mode through SST,
Then install printer Firmware
NOTE:
if u receive HD Format error with a OEM Canon HDD, the Flash ROM PCB could be corrupted
The part numbers for the Hard Disk Drive for this series machine have been updated.
The new numbers are as follows:
FK2-9008-000 iRA 6055 / 6065 / 6075
FK4-1550-000 iRA 6275 / 6265 / 6255
3 methods for using the CDS to update Firmware
Method 1:
The technician is onsite, enters service mode on the copier, selects the updater and has the machine attach to the CDS where the firmware is brought to the machine and the technician may select a version to apply and manually install the firmware.
Method 2 :
The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect to the CDS to obtain Firmware.
The Firmware will reside on the device until such time as a service technician visits the device and manually applies the Firmware.
Method 3:
The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect with CDS, obtain the firmware and apply it automatically without any intervention of a technician.
Bookmarks