Thanks Thanks:  0
Dislikes Dislikes:  0
Page 5 of 5 FirstFirst 12345
Results 41 to 46 of 46

Thread: IR3235 Canon

  1. #41
    East Coast Imaging 2,500+ Posts
    IR3235 Canon

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,401
    Rep Power
    63
    Quote Originally Posted by Atta View Post
    I didn't swap them, I have to change the mai board there is a burnt chip under the board

    Thanks,
    I need a new board.
    Ouch!

    Let us know.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  2. #42
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,607
    Rep Power
    51
    Usually you can smell a burnt chip....a lot of shotgun blasting and not much troubleshooting going on here....grab the manual and a meter...all Canons have a remote signal generated by the main controller...if it is missing none of the boards or power supplies will fire up

  3. #43
    Service Manager 10,000+ Posts
    IR3235 Canon

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,056
    Rep Power
    235
    cookout..jpg

    smells like a burnt marshmallow
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #44
    Junior Member
    Join Date
    Feb 2020
    Location
    solwez,zambia,north western province
    Posts
    2
    Rep Power
    0

    Lightbulb Re: IR3235 Canon

    Quote Originally Posted by teckat View Post


    If the Main Controller "registered value" ID does not match the REAL TIME CLOCK (RTC) ID, the Main Controller Malfunctions; preventing the LCD display from powering up or no power to unit. By shorting JP1 on the Main Controller it will clear the RTC "registered value", to correct the ID between the Main Controller and RTC Circuit.


    Procedure:
    1.
    Turn OFF the Main Unit.
    2. Either unplug the power cord from the wall.
    3. Remove the rear cover of the Main Unit.
    4. Below the left leg of the Battery, jump JP1 for 3-5 seconds.
    5. Plug in the power cord and turn on the Main Unit.
    6. Verify that the Main Unit powers ON and that the LCD display works.
    7. Re-install the rear cover.

    Attachment 5231
    hello my canon ir3235n lcd backlights are not working,whats the way forward

  5. #45
    Service Manager 5,000+ Posts
    IR3235 Canon

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    9,959
    Rep Power
    231

    Re: IR3235 Canon

    Quote Originally Posted by lwaobarry View Post
    hello my canon ir3235n lcd backlights are not working,whats the way forward
    1) not the same model
    2) thread dead by 10yrs
    3) start a new thread grave robber

  6. #46
    Junior Member
    Join Date
    Feb 2020
    Location
    solwez,zambia,north western province
    Posts
    2
    Rep Power
    0

    Re: IR3235 Canon

    My Canon ir3235n photocopier LCD backlights re not working and the LCD/screen is blackout.please asist

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here