Only issues i have had is the crappy internal A1 finisher
I have had to replaced 3 gripper units, followed by total finisher replacement, Gripper unit rails (4 so far)
And replace 2 of them with ext. finishers instead to cure the E532 E533 errors
But rumours have it that Canon at bringing out a New internal finisher to replace the A1
(God i hope that it's going to be better then the old one)
Oh yeah, and 3 fixing films due to a whining, droning noise with the machine is in use
But part from them problems the machine is okay to work on, with only drums going
Yeah , heard that the A1 Gripper rails were failing. So much that they are out of stock in the UK atm. Strange I have never had to fit one yet.
What was the replacement gripper for? Was it just for the newer type units? ( I have 52 of the old ones in my garage if anyone is interested )
MrB - you not had any 1101 / FF90 / 010C 3-way jamming issues?
Yes, I am a nerd.
Gaming PC - check. Raspberry Pi - Check. Custom ROM on phone - check. Thick glasses - check.
3-way unit jams
Nope not as yet, but that will not put the mockers on it lol
Have been told there are a few machines out there causing this problem, and a replacement 3-way unit fixes it
But like the gripper rails, none in stock in the UK
I changed the grippers for new ones trying o get shut of the E532 & E533 errors
fixedit for about 3 days till it all started again
Then it was a swap from internal to ext. finishers
Hope these rumours are true for the new inner finisher
Yeah. I have fitted 5x 3 way units recently. I also have one out there that has run for 3 weeks after swapping out just the top section of the 3 way unit. I believe a permanent fix is imminent . I would imagine it involves PS39 and 40 or the wiring to those.
Was funny, I had to say I REALLY wanted the 3 way units as they were low stock.
Yes, I am a nerd.
Gaming PC - check. Raspberry Pi - Check. Custom ROM on phone - check. Thick glasses - check.
Thanks for all the feed back guys.. Sounds like all is not yet lost.. PS39 and E075 are my big issues . So will keep plugging away for the mo. ..
Again Thanks . Always good to hear from the field and not the sales men ..
Bookmarks